UY 接續子
UY 接續子專用於電話線、網路線和監視顯示器線路連接。適用於 22~26AWG單芯銅線的熔接。包含剝線刀組和內部防水油膠，以保護線路連接點不受潮或惡劣環境的影響。
UY 接續子無需剝線，方便使用。是目前弱電、通訊業最常使用的線路熔接材料。
主要特點
| Connector | Type Connectio | Max. Insulation O.D. Metric (mm) In | Cable Type | ||||
| PIC-Unfilled Metric (mm) AWG | PIC-filled Metric (mm) AWG | Pulp or Paper Metric (mm) AWG | |||||
 |
 |
1.52 .060 | .7 - .4 22-26 | .7 - .4 22-26 | .7 - .4 22-26 | ||
測試報告
| TEST | RESULT |
| Vibration Heat / Cold Stress Relaxation High humidity (△R) Temperature Cycle | 2.0 milliohm change< |
| Wire Pull Out | Greater than 90% Control wire Breaking Strength |
| High Humidity Insulation Resistance | Greater than 1011 |
| Water Soak Insulation Resistance | Greater than 109 |
| Dielectric strength | Greater than 3.0kv AC |
| Max. recommenced voltage | 400V DC |
| Max. recommended amperage | 10A |
介紹
- Locate the joint by twisting the wires one full turn.
- Clip wires evenly to 19mm (3/4″) Minimum. (Do Not Strip Insulation.)
- Hold Connector with button side down. Insert wires all the way into ports.
- Self-stripping, insulated and moisture resistant connector for 2-wire solid
- Copper conductor combinations of 0.7-0.4 mm (22-26 AWG) having maximum insulation O.D. of 1.52mm (0.06 inches).5. Picture and the schematic with size
