UR2 接續子
UR2 接續子適用於單芯銅線的熔接，其線徑。 UR2 具有免剝線、絕緣性佳、美觀耐用、節省施工時間等特性。
UR2 接續子適用於通訊電纜及汽車線、工業訊號線、直線連接；本產品內部包含剝線刀組和防水油膠，可保護導線連接點不受潮或惡劣環境影響。UR2 接續子無需剝線、方便使用，是通訊業最常使用的電線接續材料。
技術規格
| Connector | Type Connectio | Max. Insulation O.D. Metric (mm) In | Cable Type | ||||
| PIC-Unfilled Metric (mm) AWG | PIC-filled Metric (mm) AWG | Pulp or Paper Metric (mm) AWG | |||||
 |
 |
2.08 .082 | .9 - .4 19-26 | .9 - .4 19-26 | .9 - .4 19-26 | ||
測試報告
| TEST | RESULT |
| Vibration Heat / Cold Stress Relaxation High humidity (△R) Temperature Cycle | 2.0 milliohm change< |
| Wire Pull Out | Average: Greater than 90% Control wire Breaking Strength. Minimum: Not less than 60% Control wire Breaking Strength. |
| High Humidity Insulation Resistance | Greater than 1011 |
| Water Soak Insulation Resistance | Greater than 109 |
| Dielectric strength | Greater than 3.0kv AC |
| Max. recommenced voltage | 400V DC |
| Max. recommended amperage | 10A |
應用項目
- Clip wires evenly to 19mm (3/4″) Minimum. (Do Not Strip Insulation.)
- Hold Connector with button side down. Insert wires all the way into ports.
- Locate the joint by twisting the wires one full turn.
- Self-stripping, insulated and moisture resistant connector for 3-wire solidCopper conductor combinations of 0.9-0.4 mm (19-26 AWG) having maximum insulation O.D. of 2.08mm (0.082 inches).
- The picture and schematic with size
