P9610A/P9611A Mixed Mode Power Supply (Switched Efficiency + Linear Performance)
The P9610A Series of programmable DC power supplies gives you the performance of the top-of-the-line power supplies at an outstanding price. All models provide clean power, excellent regulation and a fast transient response.
The P961xA Series is designed to meet the requirements of the most demanding applications in circuit design and verification, production testing, and quality assurance with the superior quality and reliability that you have come to expect from PICOTEST.
Key Features
- Highest Quality Yet Competitively Priced
- Continuous Autoranging
- Better Transient Response
- Low noise – 35% less than competitors
- Optical controls – Don’t get dirty or wear out
- Programmed Power Sequencing Capability
- Lightweight < 2.5kgs (5.5 lbs) and Stackable
Specifications
| Output Ratings (@ 0°C ~ 40°C) (P9610A/P9611A) | |
| Voltage | 0 to 36 V / 0 to 60 V³ (P9611A) |
| Current | 0 to 7 A / 0 to 6 A (P9611A) |
| Programming Accuracy¹ 1 Year (@ 25°C ±5°C), (% of Output + Offset) | |
| Voltage | 0.05% + 10 mV |
| Current | 0.2% + 10 mA |
| Read-Back Accuracy¹ 1 Year (over USB or front panel with respect to actual output (@ 25°C ±5°C), (% of Output + Offset) | |
| Voltage | 0.05% + 5 mV |
| Current | 0.15% + 5 mA |
| Ripple and Noise with outputs ungrounded, or either output terminal grounded, 20 Hz to 20 MHz | |
| Voltage | < 0.35 mVrms / < 0.5 mVrms (P9611A) < 2 mV p-p / < 3 mV p-p (P9611A) |
| Current | < 2 mArms |
| Common Mode Current | < 1.5 µArms |
| Load Regulation ± (% of Output + Offset) Change in output voltage or current for any load change within ratings. | |
| Voltage | < 0.01 % + 2 mV |
| Current | < 0.01 % + 250 µA |
| Line Regulation ± (% of Output + Offset) Change in output voltage or current for any load change within ratings. | |
| Voltage | 0.01 % + 2 mV |
| Current | 0.01% + 250µA |
| Programming Resolution | |
| Voltage | 1 mV |
| Current | 0.21 mA / 1 mA (P9611A) |
| Read-Back Resolution | |
| Voltage | 1 mV |
| Current | 0.1 mA / 0.21 mA (P9611A) |
| Meter Resolution | |
| Voltage | 1 mV / 10 mV (P9611A) |
| Current | 0.1 mA / 1 mA (P9611A) |
| Transient Response Time Less than 30/50u sec for output recover to within 15 mV following a change in output current from full load to half load or vice versa. | |
| Command Processing Time via GPIB | |
| Read-Back Commands: Maximum time to read-back output by MEASure? commands | < 20 ms |
| Output Programming Range (maximum programmable values) | |
| Voltage | 0 to 37.8 V / 0 to 60 V (P9611A) |
| Current | 0 to 7.35 A / 0 to 6 A (P9611A) |
| Temperature Coefficient ±(% of Output + Offset) Maximum change in output / read-back per °C after a 30-minute warm-up. | |
| Voltage | 0.01 % + 3 mV / 0.01 % + 10 mV (P9611A) |
| Current | 0.02 % + 3 mA |
| Stability (% of Output + Offset) Maximum change in output / read-back per °C after a 30-minute warm-up. | |
| Voltage | 0.02 % + 1 mV / 0.05 % + 10 mV (P9611A) |
| Current | 0.1 % + 1 mA / 0.15 % + 2 mA (P9611A) |
| Voltage Programming Speed Maximum time required for output voltage to settle within 1 % of its total excursion (for resistive load). Excludes command processing time. | |
| Full Load Up (0V ~ 36V): | < 40 ms / (0V~60V): < 100 ms (P9611A) |
| Full Load Down (36V ~ 0V): | < 40 ms / (60V~0V): < 50 ms (P9611A) |
| No Load Up (0V ~ 36V) | < 20 ms / (0V~60V): < 35 ms (P9611A) |
| No Load Down (36V ~ 0V): | < 400 ms / (60V~0V): < 500 ms (P9611A) |
| General Specifications² | |
| Item | Limitation &Description |
| Power Supply | 100V ~120V (115V Range) 220V ~240V (230V Range) |
| Power Line (Hz) | 47Hz ~63Hz |
| Interfaces | USB &GPIB |
| Power Consumption | 400VA Maximum |
| Size & Weight for Rack (WxHxD) | 214.6 x 88.6 x 280 mm,<2500 g (5.5 Lbs) |
- The accuracy specifications are gained under 1-hour warm-up condition and the calibration at 25°C.
- For more information, please check the user’s manual.
- The red supplements are the P9611A’s specifications. If there is no red, the specs. are the same as the P9610A’s.
The specifications are subject to change without notice due to design improvements.
