P9610A/P9611A 混合模式電源供應器（開關效率+線性輸出）
P9610A 系列可編程直流電源供應器以優惠的價格提供頂級電源供應器的性能。所有型號都提供乾淨的電源、出色的調節和快速的瞬間響應。
P961xA 系列旨在滿足電路設計和驗證、生產測試和品質保證方面最苛刻應用的要求，並提供您對 PICOTEST 卓越品質和可靠性的期望。
混合型DC直流電源供應器-支援電壓補償/可串並/可程控
- 混合型:線性與開關式結合技術
- 無段高壓大電流輸出
- 全新主從控制技術，提供多樣連接輸出
- 高效散熱系統裝置與超靜音風扇
- 高速暫態響應時間
- 保護設計I: 自動短路保護設計
- 保護設計II: OVP/OCP/OTP
- 簡易操控設計: 長效光學旋鈕、遠端感測無須短路片
- 低雜訊、低漣波特性提供純淨的電源輸出
- 獨特SEQ功能提供可編輯連續輸出
- 其他特點: 快速穩定時間、體積輕巧
主要特點
- 最高品質且價格具有競爭力
- 連續自動量測
- 更好的瞬間響應
- 低噪音 – 比競爭對手低 35%
- 光學控制 – 不會變髒或磨損
- 編程電源排序功能
- 重量輕 < 2.5 公斤（5.5 磅）且可堆疊
技術規格
| Output Ratings (@ 0°C ~ 40°C) (P9610A/P9611A) | |
| Voltage | 0 to 36 V / 0 to 60 V³ (P9611A) |
| Current | 0 to 7 A / 0 to 6 A (P9611A) |
| Programming Accuracy¹ 1 Year (@ 25°C ±5°C), (% of Output + Offset) | |
| Voltage | 0.05% + 10 mV |
| Current | 0.2% + 10 mA |
| Read-Back Accuracy¹ 1 Year (over USB or front panel with respect to actual output (@ 25°C ±5°C), (% of Output + Offset) | |
| Voltage | 0.05% + 5 mV |
| Current | 0.15% + 5 mA |
| Ripple and Noise with outputs ungrounded, or either output terminal grounded, 20 Hz to 20 MHz | |
| Voltage | < 0.35 mVrms / < 0.5 mVrms (P9611A) < 2 mV p-p / < 3 mV p-p (P9611A) |
| Current | < 2 mArms |
| Common Mode Current | < 1.5 µArms |
| Load Regulation ± (% of Output + Offset) Change in output voltage or current for any load change within ratings. | |
| Voltage | < 0.01 % + 2 mV |
| Current | < 0.01 % + 250 µA |
| Line Regulation ± (% of Output + Offset) Change in output voltage or current for any load change within ratings. | |
| Voltage | 0.01 % + 2 mV |
| Current | 0.01% + 250µA |
| Programming Resolution | |
| Voltage | 1 mV |
| Current | 0.21 mA / 1 mA (P9611A) |
| Read-Back Resolution | |
| Voltage | 1 mV |
| Current | 0.1 mA / 0.21 mA (P9611A) |
| Meter Resolution | |
| Voltage | 1 mV / 10 mV (P9611A) |
| Current | 0.1 mA / 1 mA (P9611A) |
| Transient Response Time Less than 30/50u sec for output recover to within 15 mV following a change in output current from full load to half load or vice versa. | |
| Command Processing Time via GPIB | |
| Read-Back Commands: Maximum time to read-back output by MEASure? commands | < 20 ms |
| Output Programming Range (maximum programmable values) | |
| Voltage | 0 to 37.8 V / 0 to 60 V (P9611A) |
| Current | 0 to 7.35 A / 0 to 6 A (P9611A) |
| Temperature Coefficient ±(% of Output + Offset) Maximum change in output / read-back per °C after a 30-minute warm-up. | |
| Voltage | 0.01 % + 3 mV / 0.01 % + 10 mV (P9611A) |
| Current | 0.02 % + 3 mA |
| Stability (% of Output + Offset) Maximum change in output / read-back per °C after a 30-minute warm-up. | |
| Voltage | 0.02 % + 1 mV / 0.05 % + 10 mV (P9611A) |
| Current | 0.1 % + 1 mA / 0.15 % + 2 mA (P9611A) |
| Voltage Programming Speed Maximum time required for output voltage to settle within 1 % of its total excursion (for resistive load). Excludes command processing time. | |
| Full Load Up (0V ~ 36V): | < 40 ms / (0V~60V): < 100 ms (P9611A) |
| Full Load Down (36V ~ 0V): | < 40 ms / (60V~0V): < 50 ms (P9611A) |
| No Load Up (0V ~ 36V) | < 20 ms / (0V~60V): < 35 ms (P9611A) |
| No Load Down (36V ~ 0V): | < 400 ms / (60V~0V): < 500 ms (P9611A) |
| General Specifications² | |
| Item | Limitation &Description |
| Power Supply | 100V ~120V (115V Range) 220V ~240V (230V Range) |
| Power Line (Hz) | 47Hz ~63Hz |
| Interfaces | USB &GPIB |
| Power Consumption | 400VA Maximum |
| Size & Weight for Rack (WxHxD) | 214.6 x 88.6 x 280 mm,<2500 g (5.5 Lbs) |
- The accuracy specifications are gained under 1-hour warm-up condition and the calibration at 25°C.
- For more information, please check the user’s manual.
- The red supplements are the P9611A’s specifications. If there is no red, the specs. are the same as the P9610A’s.
The specifications are subject to change without notice due to design improvements.
